BCU 460T-5/2LR3-B1/1

Final Stock - Replaced with BCU 4 Series

The burner control units BCU 460 and BCU 465 control, ignite and monitor gas burners for intermittent or con- tinuous operation. As a result of their fully electronic design, they react quickly to various process requirements and are therefore suitable for frequent cycling operation.

They can be used for directly ignited industrial burners of unlimited capacity. The burners may be modulating or stage-controlled. The BCU is installed near the burner to be monitored.

On industrial furnaces, the BCU reduces the load on the central furnace control by taking over tasks that only relate to the burner, for example it ensures that the burner always ignites in a safe condition after it has been restarted.

The optional air valve control on the BCU..L assists the furnace control for cooling, purging and capacity control tasks.

The BCU 465..L is fitted with air flow monitoring and pre- and post-ventilation for use on recuperative burners.

The program status, the unit parameters and the level of the flame signal can be read directly from the unit. The burner can be controlled manually for commissioning and diagnostic purposes.

If the local requirements on the burner control unit change, the PC software BCSoft can be adjusted to the unit parameters of the application by using the optical interface.

• Replaces the local control cabinet

• For burners in intermittent operation or in continuous operation

• Flame control by UV, ionization or a further option of using the furnace chamber temperature

• Display of the program status, unit parameters and flame signal; Manual mode for burner adjustment and for diagnostic purposes

• Visualization and adaptation to the specific application via the PC programming and diagnostic software BCSoft to simplify logistics management.

Once this item is sold out, KromAmericas will be unable to place additional orders.